Daniel L.
You guys provided advanced warning and insight about bearing material wear on my old car, four years before bearing-related oil pressure issue became noticeable. Keep up the good work : )
You guys provided advanced warning and insight about bearing material wear on my old car, four years before bearing-related oil pressure issue became noticeable. Keep up the good work : )
The last report showed a large increase in titanium! Pulled the heads and popped a valve spring to find intake valve ready fall out. All 16 had hard wear due to faulty valve guides. Better the way then out on the road at speed. And GMPP could not argue, paid full repairs, $7k thank God for Blackstone Labs, this could have been real bad. All Z06 427’s need oil tested for ever.
I just wanted to thank the team at blackstone labs. I feel much better about my bike after seeing the report and thank you for the comments makes me actually feel very appreciated. I will send all my oil to yall. Customer for life thanks.
Ryan & Blackstone employees, I would just like to thank you from the bottom of my heart for all your help. If it were not for you I would have had to pay $7,000 for a new transmission in my 2010 car that I have not even had for a year. The shop was trying to tell me I must have topped off my transmission fluid with the wrong fluid. I obviously have never touched it I only have 68,000 miles on my car and I have only put 3,000 miles on it since I purchased it. Regardless they finally contacted my warranty company because of the results your wonderful employees sent me back and they had their own lab tech come out and test it, but they realized it was not my fault and my warranty company covered everything. So I just wanted to thank each and every one of you for your job well done. I appreciate what you did more than you will ever know.
Hi guys –I forgot to get back to you 18 months ago after my first analysis. You sent me a report for the Toyota WS fluid in my dad’s RAV4, which had reached the end of its useful life. I had a shop change the filter & fluid. The felt-like filter medium had actually started to deform, and was going to be sucked-out the top of the filter box by the pump. With a new filter, and 8 qts of fresh fluid, I noticed an immediate improvement in shift quality. I will definitely send you another sample in another couple years, as the vehicle doesn’t get driven much now. Keep up the good work.
Thanks for handling with such a fast feedback. So I kind of expected higher silicon levels because I ride dusty roads lately. It shows not that high tough. As you said, light vis doesn’t hurt that bad eh? Well, I think its about time to try a heavier like 15w40. See you soon. Keep up the good work.
My car has been off the road and the track since I received the analysis on my M3 that showed high levels of copper in the oil. I’ve attached a picture of one of the bearings (actually two were “in the copper”) and truly believe that had I not gotten the early warning from my Oil Analysis the issue would have been much worse. I will continue to use Blackstone for the analysis, especially with fresh bearings in the car, to chart the health of my motor.
I’ve worked with several other labs and I love you guys and how you write reports. Becoming a big Blackstone fan.
You guys are awesome, will be sending more samples as the engine gets more mileage. The exhaust valves are titanium and the guides failed. I want you to help me publish this data for all the Corvette owners so they can get this done. I had 5,000 miles after you saw how high titanium is and multiple experts told me it was all normal!!!!!!!!! This is the proof without tearing the motor down. And if it shows up again we will know the guides failed again.
Thanks for the good reports on these aircraft. It sure is nice to have the comment portion of these reports, it gives me something to show the customer rather just having numbers to show them. You guys get my vote (and business) for your informative reports that show more than just numbers.